Ethernet plugged in but there is no internet. I have no idea what happened. I just took a normal update like I always do and after that it was all gone. WiFi connects no problem, but there is no internet. Unplugged Ethernet and replugged it back in. Nothing. I dualboot with windows, internet works fine there, so there is no hardware issue. Went into a live environment and chrooted into it and reinstalled network manager and still not a fucking thing. Not sure what these are now. I know about the lo one, but never seen the second wired connection or the virbr0. Any idea how to get my Internet back? I really don’t want to reinstall the system because of this. And btw, I even tried a hotspot from my phone and a wire tether from it and still no internet.
System is endeavour OS with KDE on Wayland.
So I need 2 nameserver? One for the IP and one for the DNS?
DNS turns a domain name into an IP which can then be used to send data through your router, a dns server is the server which is used to do this conversion (www.google.com turns into an IP 1.2.3.4 (that isn’t the actual IP of google)).
There are many dns servers, normally your local devices use your router as the dns server, which forwards it to your ISP which they further transfer it over global dns servers.
Alternatively you could use Google’s DNS server (8.8.8.8) or cloudflares DNS server (1.1.1.1) but if the one on your router works then just use it.
nameserver is the same as DNS server
Tldr: set the router IP as your dns server, you only need this one.
With a few more words: set the router to use 8.8.8.8 or 1.1.1.1 and then set your computer to use 192.168.1.1 (or whatever your router’s IP is). Hope that is clearer for anyone who needs it.
I put my gateway there. Fuck, man. This is so stupid and annoying… I’m about to fucking nuke the whole fucking thing. I’m running out of patience. Why the fuck would they push a hardware update that fucks shit up like this?
deleted by creator
You only need one. Standard is to use your router IP as local nameserver.
If your internet provider has issues with name resolutions, which happens sometimes, you can instead set 8.8.8.8 (Google’s nameserver) or 1.1.1.1 (Cloudflare’s nameserver). But then you can’t ping other devices in your local network by name, and loading websites can be a tiny bit slower.
Do I put the ipv4 address in there or the ipv4 default gateway? Because I see these two and they’re not the same IP. Now, I have the ipv4 default gateway in resolv.conf
On a home internet with just one router provided by your internet provider, your router is the gateway and the local nameserver.
So you can put the ipv4 of the router in everywhere it asks for default gateway or nameserver.