I’ve had a fitbit wifi bathroom scale for a while. Getting the data out got suddenly more difficult when Google bought them, and I didn’t love giving that data to google. It’s finally died, and I’m looking at replacement options.
In a perfect world, I could just go to a store and buy a “HomeAssistant Ready” scale. If I can’t have that, I’d like a scale that is on my local network and exposes the last x weigh-ins as an API on the device, then I could write something to poll it.
I haven’t seen anything like those, but have turned up:
- a project to decode the bluetooth transmissions of a number of scales (after you build an ESP32 device for it)
- the Withings cloud based scale, but with a well documented API
Any other good options?
You must log in or # to comment.
Quick google search it seems your only options for HA are Xiaomi scales with bluetooth paired to a mcu with esphome.
perhaps a used medical scale?
I use Tasker to log my weight to a Google Sheets spreadsheet, and just use a dumb scale.
What if the shotgun makes a noise you don’t recognize? Hit it with the toaster?
If my shotgun starts making strange noises, I check the brownies.
I do similar with a shortcut on my phone to a [NocoDB Form].
I am SCP-426, your toaster.
The only technology in my house is me, and I keep a loaded shotgun next to me in case I make a noise I don’t recognize.
(Am I doing this right?)
Same here but with Apple Health. You can even build some Shortcut to log the weight via Siri if you like to.
I have a withings and I really like it. Their privacy policy made me feel better about allowing my info on the cloud. You can run it offline (it sends weight via Bluetooth to the app but won’t show 7-day trend an scale screen without wifi). I don’t mind that, so I leave it disconnected. I don’t use a home assistant though so I can’t speak to that part.
I have the withings watch also, so I use the app as my catch all health tracker which works well. it’s nice to have everything together. Can’t speak to any others but I’d recommend withings.
I went from Fitbit to Withings, that Fitbit scale was nothing but pain. Every time my battery started getting low it would disconnect from Wi-Fi and I have to re pair it. It was inconsistent, If you pick it up and move it a foot to the left you get a completely different reading than if you just leave it where it sits. Because of the messed up fluctuations, It constantly identified the wrong person in the house.
Had the Withings scale for 4 years now and it’s just been fine.
It doesn’t sync to homeassistant, but I use a Xiaomi scale with openScale off of F-Droid. There’s a few different scales supported: https://github.com/oliexdev/openScale/wiki/Supported-scales-in-openScale
This is what I use. Replaced my old Fitbit Aria 2. I weighed in on both scales for about a month, and it was consistently 0.15 kg below, which is good. The body fat measurement was a bit more off, and it varies almost nothing over long periods of time, but I don’t really trust those measurements anyway.
I believe you can set up the scale in GadgetBridge as well, but I have not tried to do that.
I use miscale 1 with gadgetbridge. Homeassistant has also autodiscivered it, but I’m hessitant to pair it with 2 different devices so no idea if it actually works.
I have a Xiaomi scale connected through an esp Bluetooth proxy. Works pretty well.
The process for this is to obtain an EPS32 with bluetooth and wifi, pair it to the scale with bluetooth then keep it powered on in range of the scale, then the data goes into HA?
Yep, pretty much. Just get an ESP32 and not an 8266.
I have it plugged into an old Nokia charger and hidden in a cupboard to service all the Bluetooth temperature and door sensors.
When I use the scale it automatically sends the data to HA. Really convenient to use.
Which firmware did you load into the ESP?
Firmware apart what did you have to do?
I zoomed in on the screen because I just assumed this was a meme.
I have a withings scale and it’s great so far.
Like you, I had a Fitbit one, and I find it sucked and was very unreliable.It’s worth noting that there is a withings home assistant integration
If you can find an old working Wii Fit Balance Board you can use it as a very accurate Bluetooth scale.
Did you do that?
If yes, could you share some info about it?Looks like a few folks have
https://github.com/schellingb/WiiBalanceScale
https://github.com/aelveborn/Wii-Scale
Going to have to try this out myself!
Really? That’s a good idea.
It’s interesting how old console tech comes back around to be useful for other stuff. I’ve used a couple Xbox Kinects to do 3D scanning and with an augmented reality sand box.
Mine are supported by Gadgetbridge and have no WiFi. Sounds secure enough to me.
I’m using the Xiaomi “Mi Body competition 2” together with https://github.com/lolouk44/hassio-addons/tree/master/mi-scale and am reasonably satisfied with it.
I have a Wyze scale, it’s well made and easy to export the data via email automatically.
Wait what I thought this was satire at first
you can’t even poke fun at selfhosted people anymore because someone WILL 100% spend 48 hours straight 3d printing and programming a toothbrush
edit: you have to be kidding me https://kuenzi.dev/toothbrush/That would be a fun thread. What’s the most unnecessary self hosted thing you’ve seen someone host or host
Lmao
I thought this one was dumb too https://lemm.ee/post/49060797
