I’m new to self-hosting. All I did so far was install Ubuntu Server, enable SSH and tried setting up DuckDNS, which I could not set up automatic update of my IP following the documentation, neither updating manually through the website, which even though seems to be changed, when I ssh the domain, I get the initial IP
Anyone using DuckDNS? Is it working properly for you guys? Did I just mess something up?
What other DDNS providers would you recommend me?
You must log in or # to comment.
If you have a Mikrotik router, you can use its built-in Dynamic DNS, and configure a CNAME on your domain name
I used to just use a script with
cronto update Cloudflare DNS records but these days I don’t screw around with exposing anything to the public internet directly, I just use Tailscale.Is there a difference between using Tailscale and Wireguard? I already have a Wireguard setup and want to know what benefits it has over Wireguard.
They’re similar but mainly Tailscale arranges WireGuard tunnels between peers. There are tons of useful features around that functionality like being able to route specific traffic through specific hosts (“nodes” using “app connectors”); it’s even better at finding a way out of hostile networks using relays.
Just as an example I typically use my VPS as an “exit node” so that all my traffic routes through it (which does a ton of tunnel hopping through commercial VPNs) while my wife isn’t into that at all, but both of us have Tailscale on our devices so when either of us accessing Home Assistant it’s routed directly to the host hosting it.
Also MagicDNS is great.
This might be obvious but it could be caching? Use a tool like dig to check if it’s really updated. Not had a problem with duckdns, works good.
I got my domain through namecheap. So, I just use them, they have a dynamicdns implementation. I setup a namecheapddns docker container that auto updates mine.
Yep same DDClient is super simple to setup with name cheap. Followed ip address changes with very little if any down time. I’ve never noticed between ip changes.
Same! Except I use windows and they have a small app that you can install and run in the background which will update the IP if needed.
I also used duckdns for years before moving to this and I never had any issues using that either. It was the same thing, small app that ran on your machine and you needed the token and it just worked.
You could be behind CGNAT - I’m not sure the best way to tell but it could be the reason.
I would also highly recommend buying a cheap domain to use - it would be the price of a coffee per year but makes life so much easier and you don’t have to depend on duckdns. You can buy through cloudflare, porkbun or many other options which you can search for a good DDNS service to update them.
I read briefly about CGNAT, a d I think this is the case, checking the IP of my services with external services I get an IP different from the one I see in my machine. Tested more than one DDNS service and all updated my IP with the same “wrong” value.
How do I solve this? Should I contact my ISP and hope they can provide a solution?
CGNAT does have a designated range by spec. 100.64.0.0/10, which covers addresses from 100.64.0.0 to 100.127.255.255. Technically they could be using any other private address space but it would be very uncommon in a modern ISP.
NoIP works great for me so far!
I’ve used no-ip.com for years without issue.
My NAS supports a few services out of the box. If you have anything like that, see what they support natively first.
Another one I have seen recommended in here is afraid.org, adding it as haven’t seen it mentioned yet.
I’m surprised the amount of people saying they have had no issues with DucksDNS. I’ve used it for about five years and had issues on and off with it being unresponsive many times.
Gave up and moved to afraid.org about a year back and that’s been a very solid service ever since.
I use them. I also like their vibe and aesthetic
I used duckdns for years without any issues at all. Only reason I switched is because I’m using Pangolin and tunneling instead of exposing my IP directly.
I have been using duckdns for a few years without issues. It should be simple enough , just set up a cron job with your details as listed on their site where you configure it. This keeps your dns entry up to date.
DuckDNS had been unreliable when I used it, but it’s been a while. I swapped over to desec.io but their signups aren’t always open. Can highly recommend them though, and they offer many paths to update the IP, including DynDNS(2) protocol or just ddclient.
Also works with certbot for Let’s encrypt certificates using dns challenge.
Same. I have a router with OPNsense. In the “Dynamic DNS” section I create a “Custom” service with the DynDNS2 protocol. I type in
update.dedyn.ioas the server address. You need to also get an api key from the desec.io web panel that you input into the username and password fields.Now everytime the router’s WAN ip changes it automatically edits the DNS zone. So instead of going “your server -> DDNS provider -> DNS CNAME record” it’s just “your server -> DNS A record”
I also have a separate token for my web proxy (traefik) so that it can edit the DNS records to get let’s encrypt certificates through dns challenge as you describe.
As for the desec signups in my case one DNS zone was no problem, but for a second one I needed to e-mail them:
Hello, would it be possible for my newly created account to get one more domain on the account please? I have two personal domains and it would be great if I could keep them both under deSEC
Hi [me], Sure! The limit is mostly there to remind users to enable DNSSEC, but it looks like you’re already doing that (at your old provider).
They asked me to (voluntarily) donate, which I did too.
I am using Dynu. It works fine and it’s free, no complaints. Their app for Linux to update periodically didn’t seem to work well from my experience, I just set up a cron job to do it instead.
I use ddclient on my vps
I ended up using Dynv6, great and simple serivce does exactly what I need. Made in Germany.
Me too. Draytek Router automatically updates the IP. Set it up once and it is working since 2-3 years (don’t exactly rember when I set it up).
I am using DuckDNS and it’s working perfectly for me. I use the DynDNS feature of my Fritz!Box to update my DuckDNS-IP. The documentation on their website is spot-on for me, even for my IPv6 and I never had any issues with DuckDNS.
What I like most about the service is the possibility to use subdomains like my-service.my-username.duckdns.org. I don’t know whether this is a commong feature or not.
When you had problems updating your IP Adresse did you consider that DNS information takes some time to propagate through the internet? I think it is not guaranteed that you can access a recently changed domain.
How did you test your DuckDNS entries?
